xfinity com activate

How to Program Your X1 Remote Control to Your TV and Audio Device at Xfinity.com activate. com

How To Program Your X1 Remote Control to Your TV and Audio Device

Your Xfinity remote for the X1 entertainment operating system can be programmed to control your set-top box, TV and audio device, such as an AV receiver or sound bar. First, let’s pair your remote to your set-top box, this allows you to put your set-top box out of sight and point your remote anywhere to control it.

Pairing your remote is easy, just follow these simple steps. First, manually turn the TV on, be sure your TV is set to the correct input for your set-top box. On your Xfinity remote control, press and hold the setup button until the LED at the top of the remote changes from red to green.

Next, press the Xfinity button and release. A three digit code will appear on your TV screen, enter the code by pressing the numbered buttons on your remote, press OK. Now the remote is paired to your set-top box, once the remote is paired to a set-top box, it can only control that particular box to pair this remote with a different box, repeat the process.

Now let’s program the remote to your TV, this will allow you to power the TV on and off, control your TV’s volume and switch between inputs on your TV. First you will need your TV manufacturers code. Here are a few of the most common TV codes, you may need to try more than one manufacturer code to find the right one, a complete list of codes can be found at xfinity.com/remotes.

Once you’ve found your code, press and hold the setup button on your remote until the LED at the top changes from red to green, then release. Type in the manufacturers code, using the numbered buttons on the remote. Once the code is entered correctly, the LED at the top of the remote should flash green twice.

Now you can control your TV’s power, volume and inputs with your remote. Programming your remote to your AV receiver or sound bar works the same way, using the manufacturer’s code. A complete list of codes can be found at xfinity.com/remotes, once you’ve found your code, press and hold the setup button on your remote until the LED at the top changes from red to green, then release.

Type in the manufacturers code, using the numbered buttons on the remote. Once the code is entered correctly, the LED at the top of the remote should flash green twice, this will allow you to turn your audio device on or off with the all power button and control the volume of your receiver or sound bar.

Once programmed, your remote will only control the volume of your receiver or sound bar and not the volume of your TV. If you need more help, please visit xfinity.com/remotes.

Write A Comment