Description: The article is mainly going to indicate us with several detailed steps of the experiment in order to make a small demonstration on flex seal to confirm whether it works well or not.
I stabbed the holes and then I put the flex seal over the holes, if you’re not careful, this will happen to run over, it’s an experiment, I don’t have no purpose for this, it is going to prove that it doesn’t leak.
We have a flow of water, you can see where it’s sealed up the holes, let’s add some water, there is quite a bit of water, you can see any weekend, so it worked, it all does not leak, this is one of the tests I could do, I still got half a container of it, so if anybody has any suggestions on something else like a test to make sure it doesn’t leak, leave it in the comments below, I’ll try to get to it.
I don’t know if it would be good for big things, important things or whatever, but it works for this little maple container, I’ll have to figure out what it cost.
Today we’re going to do a small demonstration on flex seal, it’s going to set in 24 hours, it stops leaks, we’re going to poke a couple of holes and AH this Mayfield container, we’re going to sell them to see how it works.
I’m going on switch over to that and I will see what happens, I got the Mayfield container here, I’m going to poke a couple of holes through here, we’re going to pour something on there, there’s a good bit of holes in there, I don’t know if it’s going to work or not.
I’m going to pour it on top of it, we’ll see what happens, we’re going to pour it on now, wait 48 hours and see what it does, I don’t know how well it’s going to do.