Description:The article is related to spectrum tv login. The writer primarily shows you the function of each button on the remote controller so that you can watch wonderful contents with cable box and TV easily and efficiently.
We turn on the TV and cable box, you can tell that the cable box is on by this white LED light. This is a button to turn on and off. So I press it, it goes off. So when you turn on TV, you are going to make sure that the white light is on. There’s another button on the right bottom corner, that is a reboot button.
So there’s one way to reboot, it is to unplug the power for a couple of seconds and plug it back in. This is easier, you hold down this button for five seconds, it’ll reset the box. To turn off, it would be TV power and cable power. To turn on TV, power that, it turns green, then it is OK, your cable box is connected to the TV HDMI, the disc player is connected to HDMI too.
I turn that on, you can toggle through inputting sources by going TV radio source. If you press videos source again, go down to HDMI, they’re not switched to that. Then you believe that you need your remote. So now we’ll go back to HDMI one and TV video source. Keep pressing this video source button.
So you keep pressing like that, but you need to get back to HDMI one, leave it, a TV will switch. If I want to see what’s on television, I should press the last button, because we went to TV video source. When I press guide, it does not work. T e TV light is blinking, because the remote is still trying to control the TV.
Now you have to press cable again. I press guide, now it says OK. I’m controlling the cable box. So this is the TV Guide. Then you use your arrow keys to scroll up and down. If you see something that you want to watch, you can press this, select OK button, it’ll change to that particular channel.
Or you could use your numerical keypads. If you know what channel you want to go to or if you know a show that you want to watch and you don’t know what time or what channel, you can press this B button, it’ll do a search. So you can start typing in.
If I want all of the new programs of Big Bang, I’m going to record series. From here, we’re going to make the last 15. Kick them off it runs out of room. If you have 15 episodes of Big Bang Theory recorded and you try to record another show, but there’s not enough space, you are going to kick out one of these to record another. But if you can change it to last 25 or keep all, it will never delete any show.
If I want new episodes, then you can go back up to record the show. Three dots mean that it’s recording a series. So another simple way is that we go down to general. You’re watching this show, but you have to leave when you want to watch the end, because you need to check out the second half. You can press this record button, the red dot means recording, then you can see it. But there’s a red light here too, that means its box is recording.
To watch your recordings, you press this list button, then it’ll show you all the shows that are recorded or in progress. The red means that it’s still in the progress of recording. I move the cursor to scheduled, there are no shows, do you know why? Because Big Bang Theory are all reruns. So that’s why there’s no recording.
If you want to delete shows or you are tired of Big Bang Theory, you can go down to series manager and select this, then you can cancel the series. The button is like a back button. If you press C, it’ll go back. Or you could press exit, it will get you out of there.
To go back to lists, you need to use this highlight. If you want to watch, press to select OK. Here it’s straightforward, this is your fast-forward, your rewind, your pause, your play and stop. I’m going to cancel the recording, I’m going to stop and delete it, because I am using it as a tutorial purpose. Those are the basic functions.
If you go to menu, there will be a shortcut. You can either go to guide or to your list on the feature tour, it’s like a brief tour of all the functions that the box can do. So you can watch this too. If you want to learn how to do certain things, you can press this blue on-demand button. If you press that, it will take you to our main on-demand screen. Here there are a bunch of free things that you can watch, there are also the pay-per-view movies.
You go down, it tells you how much it costs. If you select it, you can either watch a trailer or rent that from the box. If you do decide to rent it, the $5.99 will be billed to your account. It usually asks for four-digit pin, it is zero zero zero zero. So that’s the last button.
The other thing to the guide, it’s Wednesday today. If you press the plus, you can check what’s on Thursday, what’s on Friday. You can’t scroll a week in advance. The only difference between this box and the other box is that this one can record, that one cannot. Other than that, these two boxes have the same functions.