Description: The article is about suddenlink login. This is a brief introduction about SuddenLink. This passage mainly demonstrates on how to connect a computer to a television in order to watch something online on the TV screen.
This article offers some basic instructions on how to watch internet video on your HDTV set,all you’ll need is a fast internet connection like Suddenlink high-speed Internet and the right cables. You can follow this tutorial and soon you’ll be ready to use your computer to play your favorite shows or movies on your television.
You need to locate your computer’s video and audio output connections,your computer should have at least one of these options available. HDMI cables carry digital high-definition video as well as audio,it looks like this. This is a DVI connection,it carries digital video but not audio. This is the S-video,the connector is round and most commonly found on older laptops,s-video does not carry audio.
This is your computer’s VGA connector,it’s very common and used mainly to connect your computer to a monitor,this connection does not carry audio,now let’s talk about sound. Unless you’re using HDMI,you’ll need an additional audio cable. All computers use a standard mini stereo to RCA audio cable as shown here.
You need to look at the back of your TV to see what ports are available. The cable you use will depend on what ports are available on both your computer and your television. If your computer and your television have HDMI connectors,you will only need an HDMI cable since HDMI carries both audio and video in the same cable.
If both devices have DVI connectors,you’ll need a standard DVD cable and an audio cable. If you have DVI on your computer and HDMI on your television or vice versa,you’ll need a DVI to HDMI cable and an audio cable. If you have s-video on both devices,you’ll need an s-video cable and an audio cable. Lastly,if VGA is available,you’ll hook up your computer to your television with a VGA cable and an audio cable.
It’s time to connect the devices to one another. First,you need to make sure that both the computer and the television are turned off,you need to get your video cable and hook your computer’s output to your televisions input area,if using HDMI,this will be the only cable you’ll need.
If you’re using DVI s-video or VGA,you’ll also need to attach an audio cable. You need to plug the smaller end into the headphones or speakers jack on your computer,you need to plug the other red and white end into the audio in on your TV.
You need to make sure that the red and white labels match. When attaching the audio cable,you need to make sure that you’re using the audio in Jack’s on your TV that correspond to the same input as the video. For example,if you are using DVI and your DVI input is labeled 2 on your TV,you should use the audio inputs label 2.
You can make a note of the port number on your TV where you have attached the cables. For example,if the input you’re using is labeled 1 then remember that number,you’ll need it next. Your cables are attached,you can turn on your computer and television,you can wait until the computer fully boots up.
Next,you’ll need to change the TV’s input to the same input where you have attached the cables,you can press the input or source button on your remote control or TV,you can select the source that corresponds to the input where the new cables are attached,this input will be the one you made a note of in the prior step.
Most modern computers will most likely see there is a television attached and automatically configure itself,however if yours doesn’t,you can try these steps. On a laptop,you may have to set the computer to send a video to the newly attached television,this can be done by pressing a function key.
The key should have a little TV monitor icon next to it. On a desktop,if your television is the only display attached to your computer then you won’t need to configure anything. If you see your computer’s desktop on your television,you have done that.
However,if you are using your television as a second display,you may need to set your computer to mirror or duplicate the main display onto the television. This can done by clicking on start,control panel,display,change display settings.
In the multiple displays pulldown,you can choose duplicate these displays. You can click apply and keep changes. You should now see your computer’s desktop on your TV. You can use your web browser to find the shows you want to see.
In most cases,you’ll also have the option of enlarging the window to full screen for the best experience. Finally,after you’re finished watching content from your computer,you can simply switch the TV’s input back to your cable box for regular viewing,you may leave the computer cables attached for future use.